Department of the Treasury Internal Revenue Service
Public Charity Status and Public Support
Complete if the organization is a section 501(c)(3) organization or a section
4947(a)(1) nonexempt charitable trust.
Attach to Form 990 or Form 990-EZ. See separate instructions.
OMB No. 1545-0047
2010
Open to Public Inspection
Name of the organization
SOCIETY OF MANUFACTURING ENGINEERS
Employer identification number
38-0298770
Part I
Reason for Public Charity Status
(All organizations must complete this part.) See instructions
The organization is not a private foundation because it is: (For lines 1 through 11, check only one box.)
1
2
3
4
5
section 170(b)(1)(A)(iv). (Complete Part II.)
6
7
8
9
receipts from activities related to its exempt functions—subject to certain exceptions, and (2) no more than 331/3% of
its support from gross investment income and unrelated business taxable income (less section 511 tax) from businesses
acquired by the organization after June 30, 1975. See section 509(a)(2). (Complete Part III.)
10
11
e
By checking this box, I certify that the organization is not controlled directly or indirectly by one or more disqualified persons other than foundation managers and other than one or more publicly supported organizations described in section 509(a)(1) or section 509(a)(2).
f
If the organization received a written determination from the IRS that it is a Type I, Type II or Type III supporting organization, check this box
..................................................
g
Since August 17, 2006, has the organization accepted any gift or contribution from any of the following persons?
(i) a person who directly or indirectly controls, either alone or together with persons described in (ii)
Yes
No
and (iii) below, the governing body of the the supported organization?
................
11g(i)
(ii)
a family member of a person described in (i) above?
......................
11g(ii)
(iii)
a 35% controlled entity of a person described in (i) or (ii) above?
................
11g(iii)
h
Provide the following information about the supported organization(s).
(i) Name of supported organization
(ii) EIN
(iii) Type of organization (described on lines 1- 9 above or IRC section (see instructions))
(iv) Is the organization in col. (i) listed in your governing document?
(v) Did you notify the organization in col. (i) of your support?
(vi) Is the organization in col. (i) organized in the U.S.?
(vii) Amount of support?
Yes
No
Yes
No
Yes
No
Total
For Paperwork Reduction Act Notice, see the Instructions for Form 990.
Cat. No. 11285F
Schedule A (Form 990 or 990-EZ) 2010
Schedule A (Form 990 or 990-EZ) 2010
Page 2
Part II
Support Schedule for Organizations Described in IRC 170(b)(1)(A)(iv) and 170(b)(1)(A)(vi) (Complete only if you checked the box on line 5, 7, or 8 of Part I or if the
organization failed to qualify under Part III. If the organization fails to
qualify under the tests listed below, please complete Part III.)
Section A. Public Support
Calendar year(or fiscal year beginning in)
(a) 2006
(b) 2007
(c) 2008
(d) 2009
(e) 2010
(f) Total
1
Gifts, grants, contributions, and membership fees received. (Do not include any "unusual grants.") ....
2
Tax revenues levied for the organization's benefit and either paid to or expended on its behalf.......
3
The value of services or facilities furnished by a governmental unit to the organization without charge..
4
Total. Add lines 1 through 3..
5
The portion of total contributions by each person (other than a governmental unit or publicly supported organization) included
on line 1 that exceeds 2% of the amount shown on line 11, column (f)..
6
Public Support. Subtract line 5 from line 4.
0
Section B. Total Support
Calendar year(or fiscal year beginning in)
(a) 2006
(b) 2007
(c) 2008
(d) 2009
(e) 2010
(f) Total
7
Amounts from line 4..
8
Gross income from interest, dividends, payments received on securities loans, rents, royalties and income from similar sources..
9
Net income from unrelated business activities, whether or not the business is regularly carried on..
10
Other income. (Explain in Part IV.) Do not include gain or loss from the sale of capital assets..
11
Total support (Add lines 7 through 10).
12
Gross receipts from related activities, etc. (See instructions.)
..................
12
13
First Five Years
If the Form 990 is for the organization's first, second, third, fourth, or fifth tax year as a 501(c)(3) organization,
check this box and stop here..........................................
Section C. Computation of Public Support Percentage
14
Public Support Percentage for 2010 (line 6 column (f) divided by line 11 column (f))
.........
14
0 %
15
Public Support Percentage for 2009 Schedule A, Part II, line 14
...............
15
16a
33 1/3% support test—2010.
If the organization did not check the box on line 13, and line 14 is 33 1/3% or more, check this box
and stop here. The organization qualifies as a publicly supported organization
......................
b
33 1/3% support test—2009.
If the organization did not check the box on line 13 or 16a, and line 15 is 33 1/3% or more, check this
box and stop here. The organization qualifies as a publicly supported organization
.....................
17a
10%-facts-and-circumstances test—2010.
If the organization did not check a box on line 13, 16a, or 16b and line 14
is 10% or more, and if the organization meets the "facts and circumstances" test, check this box and stop here. Explain
in Part IV how the organization meets the "facts and circumstances" test. The organization qualifies as a publicly supported
organization
..................................................
b
10%-facts-and-circumstances test—2009.
If the organization did not check a box on line 13, 16a, 16b, or 17a and line
15 is 10% or more, and if the organization meets the "facts and circumstances" test, check this box and stop here.
Explain in Part IV how the organization meets the "facts and circumstances" test. The organization qualifies as a publicly supported organization
..............................................
18
Private Foundation
If the organization did not check a box on line 13, 16a, 16b, 17a or 17b, check this box and see
instructions
...................................................
Schedule A (Form 990 or 990-EZ) 2010
Schedule A (Form 990 or 990-EZ) 2010
Page 3
Part III
Support Schedule for Organizations Described in IRC 509(a)(2) (Complete only if you checked the box on line 9 of Part I or if the organization
failed to qualify under Part II. If the organization fails to qualify under
the tests listed below, please complete Part II.)
Section A. Public Support
Calendar year(or fiscal year beginning in)
(a) 2006
(b) 2007
(c) 2008
(d) 2009
(e) 2010
(f) Total
1
Gifts, grants, contributions, and membership fees received. (Do not include any "unusual grants.") .
1,756,950
1,464,585
1,465,598
1,525,486
1,518,148
7,730,767
2
Gross receipts from admissions, merchandise sold or services performed, or facilities furnished in any activity that is related to the organization's tax-exempt purpose......
21,171,806
34,447,442
29,386,710
27,137,740
22,612,387
134,756,085
3
Gross receipts from activities that are not an unrelated trade or business under section 513..
4
Tax revenues levied for the organization's benefit and either paid to or expended on its behalf...
5
The value of services or facilities furnished by a governmental unit to the organization without charge..
6
Total. Add lines 1 through 5.
22,928,756
35,912,027
30,852,308
28,663,226
24,130,535
142,486,852
7a
Amounts included on lines 1, 2, and 3 received from disqualified persons...
b
Amounts included on lines 2 and 3 received from other than disqualified persons that exceed the greater of $5,000 or 1% of the amount on line 13 for the year.
c
Add lines 7a and 7b..
8
Public Support (Subtract line 7c from line 6.)
142,486,852
Section B. Total Support
Calendar year (or fiscal year beginning in)
(a) 2006
(b) 2007
(c) 2008
(d) 2009
(e) 2010
(f) Total
9
Amounts from line 6...
22,928,756
35,912,027
30,852,308
28,663,226
24,130,535
142,486,852
10a
Gross income from interest, dividends, payments received on securities loans, rents, royalties and income from similar sources..
1,795,308
2,204,135
2,042,049
3,815,004
2,028,648
11,885,144
b
Unrelated business taxable income (less section 511 taxes) from businesses acquired after June 30, 1975.
3,723,255
4,946,471
3,755,822
2,117,420
2,137,687
16,680,655
c
Add lines 10a and 10b.
5,518,563
7,150,606
5,797,871
5,932,424
4,166,335
28,565,799
11
Net income from unrelated business activities not included in line 10b, whether or not the business is regularly carried on.
0
12
Other income. Do not include gain or loss from the sale of capital assets (Explain in Part IV.)
0
13
Total support (Add lines 9, 10c, 11 and 12.).
28,447,319
43,062,633
36,650,179
34,595,650
28,296,870
171,052,651
14
First Five Years
If the Form 990 is for the organization's first, second, third, fourth, or fifth tax year as a 501(c)(3) organization,
check this box and stop here.............................................
Section C. Computation of Public Support Percentage
15
Public Support Percentage for 2010 (line 8 column (f) divided by line 13 column (f))
.........
15
83.300 %
16
Public support percentage from 2009 Schedule A, Part III, line 15
...............
16
82.570 %
Section D. Computation of Investment Income Percentage
17
Investment income percentage for 2010 (line 10c column (f) divided by line 13 column (f))
......
17
16.700 %
18
Investment income percentage from 2009 Schedule A, Part III, line 17
.............
18
17.430 %
19a
33 1/3% support tests—2010.
If the organization did not check the box on line 14, and line 15 is more than 33 1/3% and line 17 is not more than 33 1/3%, check this box and stop here. The organization qualifies as a publicly supported organization
..........
b
33 1/3% support tests—2009.
If the organization did not check a box on line 14 or line 19a, and line 16 is more than 33 1/3% and line 18 is not more than 33 1/3%, check this box and stop here. The organization qualifies as a publicly supported organization
....
20
Private Foundation
If the organization did not check a box on line 14, 19a or 19b, check this box and see instructions
.....
Schedule A (Form 990 or 990-EZ) 2010
Schedule A (Form 990 or 990-EZ) 2010
Page 4
Part IV
Supplemental Information.
Supplemental Information. Complete this part to provide the explanation required by Part II, line 10; Part II, line 17a or 17b; or Part III, line 12. Also complete this part for any additional information. (See instructions).
Facts And Circumstances Test
Explanation
Schedule A (Form 990 or 990-EZ) 2010
Additional Data
Software ID:
10000149
Software Version:
2010.2.15
-
TIN:
SCHEDULE O (Form 990 or 990-EZ)
Department of the Treasury Internal Revenue Service
Supplemental Information to Form 990 or 990-EZ
Complete to provide information for responses to specific questions on
Form 990 or to provide any additional information.
Attach to Form 990 or 990-EZ.
OMB No. 1545-0047
2010
Open to Public Inspection
Name of the organization
SOCIETY OF MANUFACTURING ENGINEERS
Employer identification number
38-0298770
Identifier
Return Reference
Explanation
Form 990 Part III
3
During 2010, the Society purchased Tooling University, LLC, the leading provider of on-line training focused on the unique needs of manufacturers. Tooling University, LLC has an extensive catalog of manufacturing specific content and innovative learning tools, including hundreds of on-line training classes written for metal manufacturers, welders, assemblers and maintenance professionals. These classes are delivered through Tooling Universitys custom learning management system which provides extensive tracking and reporting capabilities. Tooling Universitys competencies tie the online curriculum to the hands-on tasks that put the theory to practice and offers customization tools, content-develoment services and multi-language support to ensure that every person has access to relevant manufacturing training that meets their specific needs.
Form 990 Part VI
2 contd
These Tooling University on-line courses provide SME with a new form of delivering education content and supplements the education historically provided by the Society.
Form 990 Part VI
6,78
--The Society has two distinct classes of members senior members and student members. The senior members have voting rights to elect the governing body and to make any changes to the Society of Manufacturing Engineers constitution. Student members do not have any voting rights, except the right to elect their own officers within their own student chapter.
Form 990 Part VI
11b
--A detailed review of the Federal Form 990 was performed by the Director of Finance, the Chief Financial Officer of the Society. When the return was finalized, it was presented to the Executive Director, the Chief Executive Officer, for discussion and review and all comments were addressed. The return was then presented to the audit committee of the Board of Directors, whose responsibility it is to review the return on behalf of the Board. Comments were addressed and the completed return was then signed by the Executive Director/CEO.
Form 990 Part VI
12c
--The Society maintains a written conflict of interest policy for its officers, directors, volunteers and employees. The policy requires the annual disclosure by officers and directors of interest that could give rise to conflicts. Exceptions, if any, are evaluated by the Board.
Form 990 Part VI
15b
--Benchmark studies have been performed when determining the compensation to be paid for all top management. A third party, Pay Governance, performed an independent assessment using multiple local and national surveys. Target compensation is based on these benchmark studies. The Executive Director/CEO conducts an annual performance review of all top management against previously set objectives. The Executive Compensation Committee conducts an annual performance review for the Executive Director/CEO against previously set objectives. Merit increases are awarded annually by the Executive Compensation Committee for all top management, based on reviews. Executive incentives are awarded based on the Executive Incentive Plan.
Form 990 Part VI
19
--The organization makes its governing documents, conflict of interest policy and financial information available to its members.
Form 990 Part XI
5
--Reconciliation of Net Assets - Other Changes in Net Assets or Fund Balances are comprised of Net Unrealized Gains on Investments of 4,882,772 and Remeasurement Gain from Restated Canadian Financial Statements of 175,851. Total Other Changes in Net Assets or Fund Balances of 5,058,623.
Form 990 Part VII
17
--Bart Aslin, SME Education Foundation Director, works an average of 50 hours per week on the SME Education Foundation, a subsidiary of the Society of Manufacturing Engineers.
Form 990 Part III Program Service Accomplishments
Line 4d Other Activities
Program Service Expenses 2,315,352, Grants and allocations 0, Revenue 1,873,435 ---Professional Development Certifications, Assessments Training--- The Society offers a number of industry recognized certifications that document knowledge, skills and abilities within specific job categories or manufacturing processes. Our certification programs provided certifications for 9,350 manufacturing professionals that serve to showcase their achievements. In addition, the Society also offers assessment opportunities for the manufacturing engineer to gauge their progress. On-site, on-line and other hybrid training opportunities offer flexibility and convenience for todays engineer. Tooling University, LLC has an extensive catalog of manufacturing specific content and innovative learning tools, including hundreds of on-line training classes written for metal manufacturers, welders, assemblers and maintenance professionals. These classes are delivered through Tooling Universitys custom learning management system which provides extensive tracking and reporting capabilities. Tooling Universitys competencies tie the online curriculum to the hands-on tasks that put the theory to practice and offers customization tools, content-develoment services and multi-language support to ensure that every person has access to relevant manufacturing training that meets their specific needs.
Form 990 Part III Program Service Accomplishments
Line 4d Other Activities
Program Service Expenses 1,245,995, Grants and allocations 0, Revenue 627,274 ---Technical, Educational and Other--- SME provides conferences and training programs for various manufacturing processes, procedures and materials. These programs range from introductory level courses to in-depth technical and process solutions. During 2010, there were approximately 500 attendees at the various educational events. The Society offers more than 600 books, CDs and DVDs that educate the professional manufacturer on many topics within the field. The Society also publishes two scholarly, peer-reviewed journals on manufacturing systems and pioneering processes. SME maintains an archive of more than 17,000 technical papers. Our e-newsletters provide timely articles on lean techniques and quality in manufacturing principles.
Form 990 Part III Program Service Accomplishments
Line 4d Other Activities
Program Service Expenses 385,500, Grants and allocations 385,500, Revenue 0 ---Engineering Education Grants--- Through its SME Education Foundation and other grants, SME inspires youth to pursue careers in manufacturing, supports students studying for a career in an engineering-related field through its hands-on programs, college scholarships and an interactive web site where students can explore manufacturing careers.
For Paperwork Reduction Act Notice, see the Instructions for Form 990 or 990-EZ.